Specifications

RoamAbout Mobility System Software Command Line Reference 12-7
set spantree
EnablesordisablesSTPononeVLANorallVLANsconfiguredonaRoamAboutswitch.
Syntax
set spantree {enable | disable} [{all | vlan vlan-id | port port-list vlan-id}]
Parameters
Defaults
Disabled.
Mode
Enabled.
Examples
ThefollowingcommandenablesSTPonallVLANsconfiguredonaRoamAbou tswitch:
RBT-8100# set spantree enable
success: change accepted.
ThefollowingcommanddisablesSTPonVLANburgundy:
RBT-8100# set spantree disable vlan burgundy
success: change accepted.
Related Commands
showspantreeonpage 12‐20
enable EnablesSTP.
disable DisablesSTP.
all EnablesordisablesSTPonallVLANs.
vlanvlan‐id VLANnameornumber.MSSenablesordisablesSTPononlythespecified
VLAN,onallportswithintheVLAN.
portport‐listvlan‐id PortnumberorlistandtheVLANthe
portsarein.MSSenablesordisables
STPononlythespecifiedports,withinthespecifiedVLAN.