Specifications

RoamAbout Mobility System Software Command Line Reference 12-5
clear spantree portvlanpri
Resetstothedefaultvaluethepriorityofanetworkportorportsforselectionaspartofthepathto
theSTProotbridge,ononeVLANorallVLAN s.
Syntax
clear spantree portvlanpri port-list {all | vlan vlan-id}
Parameters
Defaults
None.
Mode
Enabled.
Usage
MSSdoesnotchangeaport’spriorityforVLANsotherthantheone(s)youspecify.
Example
ThefollowingcommandresetstheSTPpriorityforport20inVLANavocado:
RBT-8100# clear spantree portvlanpri 20 vlan avocado
success: change accepted.
Related Commands
• clearspantreeportprionpage 12‐3
• setspantreeportprionpage 12‐15
• setspantreeportvlanprionpage 12‐17
• showspantreeonpage 12‐20
port‐list Listofports.Theportpriorityisresetto32(thedefault)onthespecified
ports.
all ResetsthepriorityforallVLANs.
vlanvlan‐id VLANname
ornumber.MSSresetsthe priorityforonlythespecified
VLAN.