Specifications

RoamAbout Mobility System Software Command Line Reference 12-3
clear spantree portpri
Resetstothedefaultvaluethepriorityofanetworkportorportsforselectionaspartofthepathto
theSTProotbridgeinallVLANsonaRoamAboutswitch.
Syntax
clear spantree portpri port-list
Parameters
Defaults
None.
Mode
Enabled.
Usage
ThiscommandresetsthepriorityinallVLANs.ToresetthepriorityforonlyspecificVLANs,use
theclearspantreeportvlanpricommand.
Example
ThefollowingcommandresetstheSTPpriorityonport9tothedefault:
RBT-8100# clear spantree portpri 9
success: change accepted.
Related Commands
• clearspantreeportvlanprionpage 12‐5
• setspantreeportprionpage 12‐15
• setspantreeportvlanprionpage 12‐17
• showspantreeonpage 12‐20
port‐list Listofports.Theportpriorityisresetto32(thedefault)onthespecified
ports.