Specifications

RoamAbout Mobility System Software Command Line Reference 3-9
Example
ThefollowingcommandsstageanRBT‐8100switchtousetheauto‐configoption.Thenetwork
wheretheswitchisinstalledhasaDHCPserver,sotheswitchisconfiguredtousetheMSSDHCP
clienttoobtainanIPaddress,defaultrouteraddress,DNSdomainname,andDNSserverIP

addresses.
1. ConfigureaVLAN:
RBT-8100# set vlan 1 port 7
success: change accepted.
2. EnabletheDHCPclientonVLAN1:
RBT-8100# set interface 1 ip dhcp-client enable
success: change accepted.
3. Enabletheauto‐configoption:
RBT-8100# set auto-config enable
success: change accepted.
4. Savetheconfigurationchanges:
RBT-8100# save config
success: configuration saved.
Related Commands
• cryptogeneratekeyonpage 15‐6
• cryptogenerateself‐signedwebonpage 15‐9
• saveconfigonpage 20‐20
• setinterfacedhcp‐clientonpage 7‐25
• setvlanportonpage 5‐12