Specifications

RoamAbout Mobility System Software Command Line Reference 12-1
12
STP Commands
UseSpanningTreeProtocol(STP)commandstoconfigureandmanagespanningtreesonthe
virtualLANs(VLANs)configuredonaRoamAboutswitch,tomaintainaloop‐freenetwork.This
chapterpresentsSTPcommandsalphabetically.Usethefollowingtabletolocatecommandsin
thischapter.
For information about... Refer to page...
clear spantree portcost 12-2
clear spantree portpri 12-3
clear spantree portvlancost 12-4
clear spantree portvlanpri 12-5
clear spantree statistics 12-6
set spantree 12-7
set spantree backbonefast 12-8
set spantree fwddelay 12-9
set spantree hello 12-10
set spantree maxage 12-11
set spantree portcost 12-12
set spantree portfast 12-14
set spantree portpri 12-15
set spantree portvlancost 12-16
set spantree portvlanpri 12-17
set spantree priority 12-18
set spantree uplinkfast 12-19
show spantree 12-20
show spantree backbonefast 12-23
show spantree blockedports 12-24
show spantree portfast 12-25
show spantree portvlancost 12-27
show spantree statistics 12-28
show spantree uplinkfast 12-33