Specifications

RoamAbout Mobility System Software Command Line Reference 11-161
auth-fallthru Secondary (fallthru) encryption type when a user tries to authenticate but the
RoamAbout switch managing the radio does not have an authentication rule
with a userglob that matches the username.
• last-resort—Automatically authenticates the user and allows access to the
SSID requested by the user, without requiring a username and password.
• none—Denies authentication and prohibits the user from accessing the
SSID.
• web-portal—Redirects the user to a web page for login to the SSID.
WEP Key 1 value State of static WEP key number 1. Radios can use this key to encrypt traffic
with static Wired-Equivalent Privacy (WEP):
• none—The key is not configured.
• preset—The key is configured.
Note: The WEP parameters apply to traffic only on the encrypted SSID.
WEP Key 2 value State of static WEP key number 2:
• none—The key is not configured.
• preset—The key is configured.
WEP Key 3 value
StateofstaticWEPkeynumber3:
• none—The key is not configured.
• preset—The key is configured.
WEP Key 4 value State of static WEP key number 4:
• none—The key is not configured.
• preset—The key is configured.
WEP Unicast Index Index of the static WEP key used to encrypt unicast traffic on an encrypted
SSID.
WEP Multicast Index Index of the static WEP key used to encrypt multicast traffic on an encrypted
SSID.
Shared Key Auth Indicates whether shared-key authentication is enabled.
WPA enabled Indicates that the Wi-Fi Protected Access (WPA) information element (IE) is
enabled. Additional fields display the settings of other WPA parameters:
• ciphers—Lists the WPA cipher suites advertised by radios in the radio
profile mapped to this service profile.
• authentication—Lists the authentication methods supported for WPA
clients:
• 802.1X—dynamic authentication
• PSK—preshared key authentication
• TKIP countermeasures time—Indicates the amount of time (in ms) MSS
enforces countermeasures following a second message integrity code
(MIC) failure within a 60-second period.
Note: The WPA fields are displayed only when the WPA IE is enabled.
Table 11-20 Output for show service-profile (continued)
Field Description