Specifications

11-160 Access Point Commands
show service-profile
Displaysserviceprofileinformation.
Syntax
show service-profile {name | ?}
Parameters
Defaults
None.
Mode
Enabled.
Example
Thefollowingcommanddisplaysinformationforserviceprofilewpa_clients:
RBT-8100# show service-profile wpa_clients
ssid-name: Enterasys ssid-type: crypto
beacon: yes auth-fallthru: web-portal
WEP Key 1 value: <none> WEP Key 2 value: <none>
WEP Key 3 value: <none> WEP Key 4 value: <none>
WEP Unicast Index: 1 WEP Multicast Index: 1
Shared Key Auth: NO
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
Table 11‐20describesthefieldsinthisdisplay.
name Displaysinformationaboutthenamedserviceprofile.
? Displaysalistofserviceprofiles.
Table 11-20 Output for show service-profile
Field Description
ssid-name Service set identifier (SSID) managed by this service profile.
ssid-type SSID type:
• crypto—Wireless traffic for the SSID is encrypted.
• clear—Wireless traffic for the SSID is unencrypted.
beacon Indicates whether the radio sends beacons, to advertise the SSID:
•no
•yes