Specifications

RoamAbout Mobility System Software Command Line Reference 11-157
show radio-profile
Displaysradioprofileinformation.
Syntax
show radio-profile {name | ?}
Parameters
Defaults
None.
Mode
Enabled.
Usage
MSScontainsadefaultradioprofile.EnterasysNetworksrecommendsthatyoudonotchangethis
profilebutinsteadkeeptheprofileforreference.
Example
Thefollowingcommandshowsradioprofileinformationforthedefaultradioprofile:
RBT-8100# show radio-profile default
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Long Preamble: no Tune Channel: yes
Tune Power: no Tune Channel Interval: 3600
Tune Power Interval: 600 Channel Holddown: 300
Power Backoff Timer: 10 Countermeasures: none
Active-Scan: yes QoS Mode: wmm
No service profiles configured.
Table 11‐19describesthefieldsinthisdisplay.
name Displaysinformationaboutthenamedradioprofile.
? Displaysalistofradioprofiles.
Table 11-19 Output for show radio-profile
Output What it displays...
Beacon Interval Rate (in milliseconds) at which each access point radio in the profile
advertises the beaconed SSID.
DTIM Interval Number of times after every beacon that each access point radio in the radio
profile sends a delivery traffic indication map (DTIM).
Max Tx Lifetime Number of milliseconds that a frame received by a radio in the radio profile
can remain in buffer memory.