Specifications

RoamAbout Mobility System Software Command Line Reference 11-155
show dap unconfigured
DisplaysDistributedaccesspointsthatarephysicallyconnectedtothenetworkbutthatarenot
configuredonanyRoamAboutswitches.
Syntax
show dap unconfigured
Defaults
None.
Mode
Enabled.
Usage
ThiscommandalsodisplaysanaccesspointthatisdirectlyconnectedtoaRoamAboutswitch,if
theRoamAboutporttowhichtheaccesspointisconnectedisconfiguredasanetworkport
insteadofanaccesspointaccessport,andifthenetworkportisamemberofaVLAN.
If
aDistributedaccesspointisconfiguredonaRoamAboutswitchinanotherMobilityDomain,
theaccesspointcanappearintheoutputuntiltheaccesspointisabletoestablishaconnection
withaRoamAboutswitchinitsMobilityDomain.Aftertheaccesspointestablishesaconnection,
theentryforthe
accesspointagesoutandnolongerappearsinthecommand’soutput.
Entriesinthecommandoutput’stableageoutaftertwominutes.
Example
ThefollowingcommanddisplaysinformationfortwoDistributedaccesspointsthatarenot
configured:
RBT-8100# show dap unconfigured
Total number of entries: 2
Serial Id Model IP Address Port Vlan
----------- ------ --------------- ---- --------
0333001287 AP3000 10.3.8.54 5 default
0333001285 AP3000 10.3.8.57 7 vlan-eng
Table 11‐18describesthefieldsinthisdisplay.
Table 11-18 Output for show dap unconfigured
Field Description
Serial Id Serial ID of the Distributed access point.
Model Access point model number.
IP Address IP address of the access point. This is the address that the access point
receives from a DHCP server. The access point uses this address to send a
Find RoamAbout message to request configuration information from
RoamAbout switches. However, the access point cannot use the address to
establish a connection unless the access point first receives a configuration
from a RoamAbout switch.