Specifications

RoamAbout Mobility System Software Command Line Reference 11-153
show dap global
DisplaysconnectioninformationforDistributedAPsconfiguredonaRoamAboutswitch.
Syntax
show dap global [dap-num | serial-id serial-ID]
Parameters
Defaults
None.
Mode
Enabled.
Usage
ToshowinformationonlyforDistributed accesspointsthathaveactiveconnections,usetheshow
dapconnectioncommand.
Example
ThefollowingcommanddisplaysconfigurationinformationforallDistributedaccesspoints
configuredonaRoamAboutswitch:
RBT-8100# show dap global
Total number of entries: 8
DAP Serial Id RBT IP Address Bias
--- ----------- --------------- ----
1 11223344 10.3.8.111 HIGH
- 11223344 10.4.3.2 LOW
2 332211 10.3.8.111 LOW
- 332211 10.4.3.2 HIGH
17 0322100185 10.3.8.111 HIGH
- 0322100185 10.4.3.2 LOW
18 0321500120 10.3.8.111 LOW
- 0321500120 10.4.3.2 HIGH
Table 11‐17describesthefieldsinthisdisplay.
dap‐num NumberofaDistributedaccesspointforwhichtodisplay
configurationsettings.
serial‐idserial‐ID AccesspointserialID. 