Specifications

11-146 Access Point Commands
Related Commands
• set{ap|dap}radioau to‐tunemax‐poweronpage 11‐33
• setradio‐profileauto‐tunechannel‐configonpage 11‐46
• setradio‐profileauto‐tunechannel‐holddownonpage 11‐48
• setradio‐profileauto‐tunechannel‐intervalonpage 11‐49
• setradio‐profileauto‐tunepower‐configon
page 11‐52
• setradio‐profileauto‐tunepower‐intervalonpage 11‐53
• showauto‐tuneneighborsonpage 11‐147
• showradio‐profileonpage 11‐157
CRC Errors count Number of frames received by the radio on that active channel that had CRC
errors. A high CRC error count can indicate a hidden node or co-channel
interference.
Packet Retransmission
Count
Number of retransmitted packets sent from the client to the radio on the
active channel. Retransmissions can indicate that the client is not receiving
ACKs from the access point radio.
Phy Errors Count Number of frames received by the access point radio that had physical layer
errors on the active channel. Phy errors can indicate interference from a non-
802.11 device.
Table 11-13 Output for show auto-tune attributes (continued)
Output What it displays...