Specifications

11-142 Access Point Commands
Access point port Access point port number connected to this RoamAbout switch port.
State State of the access point:
• init—The access point has been recognized by the RoamAbout switch but
has not yet begun booting.
• booting—The access point has asked the RoamAbout switch for a boot
image.
• image downloading—The access point is receiving a boot image from the
RoamAbout switch.
• image downloaded—The access point has received a boot image from
the RoamAbout switch and is booting.
• configuring—The access point has booted and is ready to receive or is
already receiving configuration parameters from the RoamAbout switch.
• operational—The access point has received configuration parameters for
one or more radios and is ready to accept client connections.
• configure failure—One or more of the radio parameters received from the
RoamAbout switch is invalid.
For Distributed access points, this field also indicates whether the access
point’s management traffic with the RoamAbout switch is encrypted, and
whether the access point’s fingerprint has been verified on the RoamAbout
switch:
• not encrypted—The management session is not encrypted.
• encrypted but fingerprint not verified—The access point’s management
traffic is encrypted, but the access point’s fingerprint has not been verified
in MSS.
• encrypted and verified—The access point’s management traffic is
encrypted and the access point’s fingerprint has been verified in MSS.
CPU info Specifications and identification of the CPU.
Uptime Amount of time since the access point booted using this link.
Table 11-11 Output for show ap status (continued)
Output What it displays...