Specifications

RoamAbout Mobility System Software Command Line Reference 11-141
Radio 2 type: 802.11a, state: configure succeed [Enabled]
operational channel: 64 operational power: 14
base mac: 00:0b:0e:00:d2:c1
bssid1: 00:0b:0e:00:d2:c1, ssid: public
bssid2: 00:0b:0e:00:d2:c3, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c5, ssid: mycorp-tkip
RFID Reports: Inactive
ThefollowingcommandusestheterseoptiontodisplaybriefinformationforDistributedaccess
points:
RBT-8100# show dap status terse
Total number of entries: 4
Operational: 1, Image Downloading: 0, Unknown: 3, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed
a = auto DAP, i = insecure
Port Flg IP Address Model MAC Address Radio1 Radio2 Uptime
------ --- ------------- ------ ----------------- ------ ------ ------------
3 --- AP3000 D ?/? D ?/? 0d 0h 0m 0s
Dap 1 --- AP3000 D ?/? D ?/? 0d 0h 0m 0s
Dap 2 --- AP3000 D ?/? D ?/? 0d 0h 0m 0s
Dap100 oa- 10.8.255.11 AP3000 00:0b:0e:da:da:82 E 1/17 E36/11 0d 0h 0m17s
Table 11‐11andTable 11‐11describethefieldsinthesedisplays.
Table 11-11 Output for show ap status
Output What it displays...
DAP Connection ID for the Distributed access point.
Note: This field is applicable only if the access point is configured on the
RoamAbout switch as a Distributed access point.
Port RoamAbout switch port number.
Note: This field is applicable only if the access point is directly connected to
the RoamAbout switch and the RoamAbout switch’s port is configured as an
AP access port.
IP-addr IP address of the access point. The address is assigned to the access point
by a DHCP server.
Note: This field is applicable only if the access point is configured on the
RoamAbout switch as a Distributed access point.
AP model Access point access point model number.
manufacturer Company that made the access point.
fingerprint Hexadecimal fingerprint of the access point’s public encryption key.
Note: This field is displayed only for Distributed access points.
name Access point name.
Link Status of this link with the access point and the access point port at the other
end of the link. The status can be up or down.