Specifications

11-128 Access Point Commands
show {ap | dap} config
Displaysglobalandradio‐specificsettingsforanaccesspoint.
Syntax
show ap config [port-list [radio {1 | 2}]
show dap config [dap-num [radio {1 | 2}]]
Parameters
Defaults
None.
Mode
Enabled.
Usage
MSSlistsinformationseparat elyforeachaccesspoint.
Examples
ThefollowingexampleshowsconfigurationinformationforanaccesspointonRoamAbout
switchport2:
RBT-8100# show ap config 2
Port 2: AP model: RBT-1602, POE: enable, bias: high, name: AP02
boot-download-enable: YES
force-image-download: NO
load balancing group: none
location: The conference room
contact: Bob the IT guy
Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default
auto-tune max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default
auto-tune max-power: default
port‐list Listofportsconnectedtotheaccesspoint(s)forwhichtodisplay
configurationsettings.
dap‐num NumberofaDistributedaccesspointforwhichtodisplayconfiguration
settings.
radio1 Showsconfigurationinformationforradio1.
radio2 Showsconfigurationinformationforradio2.(Thisoptiondoesnotapplyto
single‐
radiomodels.)