Specifications

RoamAbout Mobility System Software Command Line Reference 3-5
clear system
Clearsthesystemconfigurationofthespecifiedinformation.
Syntax
clear system [contact | countrycode | ip-address | location | name]
Parameters
Defaults
None.
Mode
Enabled.
Example
ToclearthelocationoftheRoamAboutswitch,typethefollowingcommand:
RBT-8100# clear system location
success: change accepted.
Caution: If you change the IP address, any currently configured Mobility Domain operations cease.
You must reset the Mobility Domain.
contact ResetsthenameofcontactpersonfortheRoamAboutswitchtonull.
countrycode ResetsthecountrycodefortheRoamAboutswitchtonull.
idle‐timeout ResetsthenumberofsecondsaCLImanagementsessioncanremainidleto
thedefaultvalue(3600seconds).
ip‐address ResetstheIPaddressoftheRoamAboutswitch
tonull.
location ResetsthelocationoftheRoamAboutswitchtonull.
name ResetsthenameoftheRoamAboutswitchtothedefaultsystemname,which
isRBT‐mm‐nnnnnn,wheremmisthemodelnumberandnnnnnnisthe
last 6 digitsoftheswitch’sMACaddress.