Specifications

RoamAbout Mobility System Software Command Line Reference 11-125
set service-profile wep active-unicast-index
SpecifiesthestaticWired‐Equiva lentPrivacy (WEP)key(oneoffour)touseforencryptingunicast
frames.
Syntax
set service-profile name wep active-unicast-index num
Parameters
Defaults
IfWEPencryptionisenabledandWEPkeysaredefined,accesspointradiosuseWEPkey1to
encryptunicastframes,bydefault.
Mode
Enabled.
Usage
Beforeusingthiscommand,youmustconfigurevaluesfortheWEPkeysyouplantouse.Usethe
setservice‐profilewepkey‐indexcommand.
Example
Thefollowingcommandconfiguresserviceprofilesp2touseWEPkey4forencryptingunicast
traffic:
RBT-8100# set service-profile sp2 wep active-unicast-index 4
success: change accepted.
Related Commands
• setservice‐profilewepactive‐multicast‐indexonpage 11‐124
• setservice‐profilewepkey‐indexonpage 11‐126
• showservice‐profileonpage 11‐160
name Serviceprofilename.
num WEPkeynumber.Youcanentera valuefrom1through4.