Specifications

11-118 Access Point Commands
Defaults
Thiscommandhasthefollowingdefaults:
• mandatory:
– 11a—6.0,12.0,24.0
– 11b — 1.0,2.0
– 11g—1.0,2.0,5.5,11.0
• disabled—None.Allratesapplicabletotheradiotypearesupportedbydefault.
• beacon‐rate:
– 11a—6.0
– 11b — 2.0
– 11g—2.0
• multicast‐rate—autoforallradiotypes.
Mode
Enabled.
Usage
Ifyoudisablearate,youcannotusetherateasamandatoryrateorthebeaconormulticastrate.
Allratesthatareapplicabletotheradiotypeandthatarenotdisabledaresupportedbytheradio.
Example
Thefollowingcommandsets802.11amandatoryratesforserviceprofilesp1to6Mbpsand9
Mbps,disablesrates48Mbpsand54Mbps,andchangesthebeaconrateto9Mbps:
RBT-8100# set service-profile sp1 transmit-rates 11a mandatory 6.0,9.0 disabled
48.0,54.0 beacon-rate 9.0
success: change accepted.
Related Commands
showservice‐profileonpage 11‐160