Specifications

RoamAbout Mobility System Software Command Line Reference 11-117
set service-profile transmit-rates
ChangesthedataratessupportedbyAPradiosforaservice‐profile’sSSID.
Syntax
set service-profile name transmit-rates {11a | 11b | 11g}
mandatory rate-list [disabled rate-list] [beacon-rate rate] [multicast-rate
{rate | auto}]
Parameters
name Serviceprofilename.
11a|11b|11g Radiotype.
mandatoryrate‐list Setofdatatransmissionratesthatclientsarerequiredto
supportinordertoassociatewithanSSIDonanAPradio.A
clientmustsupportatleastoneofthemandatoryrates.
Theseratesareadvertisedinthe
basicratesetof802.11
beacons,proberesponses,andreassociationresponseframes
sentbyAPradios.
DataframesandmanagementframessentbyAPradiosuse
oneofthespecifiedmandatoryrates.
Thevalidratesdependontheradiotype:
• 11a—6.0,9.0, 12.0,18.0,24.0,36.0,48.0,54.0
• 11b—1.0,2.0,5.5,
11.0
• 11g—1.0,2.0,5.5,6.0,9.0,11.0,12.0,18.0,24.0, 36.0,48.0,54.0
Useacommatoseparatemultiplerates;forexample:
6.0,9.0,12.0
disabledrate‐list DatatransmissionratesthatAPradioswillnotusetotransmit
data.Thissettingappliesonlytodatasentby theAPradios.
Theradios
willstillacceptframesfromclientsatdisableddata
rates.
Thevalidratesdependontheradiotypeandarethesameas
thevalidratesformandatory.
beacon‐raterate DatarateofbeaconframessentbyAPradios.Thisrateisalso
usedforprobe‐responseframes.
Thevalid
ratesdependontheradiotypeandarethesameas
thevalidratesformandatory.However,youcannotsetthe
beaconratetoadisabledrate.
multicast‐rate
{rate|auto}
DatarateofmulticastframessentbyAPradios.
• rate—Setsthemulticastratetoaspecificrate.
Thevalid
ratesdependontheradiotypeandarethesameasthevalid
ratesformandatory.However,youcannotsetthemulticast
ratetoadisabledrate.
• auto—Setsthemulticastratetothehighestratethatcan
reachallclientsconnectedtotheAPradio.