Specifications

RoamAbout Mobility System Software Command Line Reference 11-111
set service-profile soda remediation-acl
SpecifiesanACLtobeappliedtoaclientifitfailsthechecksperformedbytheSODAagent.
Syntax
set service-profile name soda remediation-acl acl-name
Parameters
Defaults
None.
Mode
Enabled.
Usage
IftheSODAagentchecksfailonaclient,bydefaulttheclientisdisconnectedfromthenetwork.
Optionally,youcanspecifyafailurepagefortheclienttoload(withthesetservice‐profilesoda
failure‐pagecommand).Whenthefailurepageisloaded,youcanoptionallyspecifyaremediation

ACLtoapplytotheclient.TheremediationACLcanbeusedtogranttheclientlimitedaccessto
networkresources,forexample.IfthereisnoremediationACLconfigured,thentheclientis
disconnectedfromthenetworkwhenthefailurepageisloaded.
Thisfunctionalityoccursonlywhentheenforce
checksoptionisenabledfortheserviceprofile.
Theenforcechecksoptionisenabledbydefault.
Example
ThefollowingcommandconfigurestheRoamA boutSwitchtoapplyacl‐1toaclientwhenitloads
thefailurepage:
RBT-8100# set service-profile sp1 soda remediation-acl acl-1
success: change accepted.
Related Commands
• setservice‐profilesodaenforce‐checksonpage 11‐106
• setservice‐profilesodafailure‐pageonpage 11‐108
• showservice‐profileonpage 11‐160
name Serviceprofilename.
acl‐name NameofanexistingsecurityACLtouseasaremediationACLforthis
serviceprofile.ACLnamesmuststartwitha
letterandarecase‐
insensitive.