Specifications

RoamAbout Mobility System Software Command Line Reference 11-109
set service-profile soda logout-page
Specifiesapage ontheRoamAboutSwitchthatisloadedwhenaclientlogsoutofthenetworkby
closingtheSODAvirtualdesktop.
Syntax
set service-profile name soda logout-page page
Parameters
Defaults
None.
Mode
Enabled.
Usage
WhenaclientclosestheSODAvirtualdesktop,theclientisautomaticallydisconnectedfromthe
network.Youcanusethiscommandtospecifyapagethatisloadedwhentheclientclosesthe
SODAvirtualdesktop.
Theclientcanrequestthispageatanytime,toensurethattheclient’ssessio n
hasbeenterminated.
YoucanaddtheIPaddressoftheRoamAboutSwitchtotheDNSserverasawell‐knownname,
andyoucanadvertisetheURLofthepagetousersasalogoutpage.
ThepageisassumedtoresideintherootdirectoryontheRoamAbout Switch.
Youcanoptionally
specifyadifferentdirectorywherethepageresides.
Examples
Thefollowingcommandspecifieslogout.htmlasthepagetoloadwhenaclientclosestheSODA
virtualdesktop:
RBT-8100# set service-profile sp1 soda logout-page logout.html
success: change accepted.
Thefollowingcommandspecifieslogout.html,inthesoda‐filesdirectory,asthepagetoloadwhena
clientclosestheSODAvirtualdesktop:
RBT-8100# set service-profile sp1 soda logout-page soda-files/logout.html
success: change accepted.
Related Commands
• showservice‐profileonpage 11‐160
name Serviceprofilename.
page PagethatisloadedwhentheclientclosestheSODAvirtualdesktop.
Note: You must also enable the HTTPS server on the RoamAbout Switch, so that clients can log out
of the network and access the logout page using HTTPS. To do this, use the set ip https server
enable command.