Specifications

11-108 Access Point Commands
set service-profile soda failure-page
SpecifiesapageontheRoamAboutSwitchthatisloadedwhenaclientfailsthesecuritychecks
performedbytheSODAagent.
Syntax
set service-profile name soda failure-page page
Parameters
Defaults
Bydefault,theRoamAboutSwitchdynamicallygeneratesapageindicatingthattheSODAagent
checkshavefailed.
Mode
Enabled.
Usage
UsethiscommandtospecifyacustompagethatisloadedbytheclientwhentheSODAagent
checksfail.Afterthispageisloaded,thespecifiedremediationACLtakeseffect,orifthereisno
remediationACLconfigured,thentheclientisdisconnectedfromthenetwork.
Thisfunctionalityoccursonly
whentheenforcechecksoptionisenabledfortheserviceprofile.
Theenforcechecksoptionisenabledbydefault.
ThepageisassumedtoresideintherootdirectoryontheRoamAbout Switch.Youcanoptionally
specifyadifferentdirectorywherethepageresides.
Examples
Thefollowingcommandspecifiesfailure.htmlasthepagetoloadwhenaclientfailstheSODA
agentchecks:
RBT-8100# set service-profile sp1 soda failure-page failure.html
success: change accepted.
Thefollowingcomm andspecifiesfailure.html,inthesoda‐filesdirectory,asthepagetoloadwhena
clientfailstheSODAagentchecks:
RBT-8100# set service-profile sp1 soda failure-page soda-files/failure.html
success: change accepted.
Related Commands
• setservice‐profilesodaenforce‐checksonpage 11‐106
• setservice‐profilesodaremediation‐aclonpage 11‐111
• showservice‐profileonpage 11‐160
name Serviceprofilename.
page Pagethatisloadediftheclientfailsthesecuritychecksperformedby
theSODAagent.