Specifications

RoamAbout Mobility System Software Command Line Reference 11-103
set service-profile shared-key-auth
Enablesshared‐keyauthentication,inaserviceprofile.
Syntax
set service-profile name shared-key-auth {enable | disable}
Parameters
Defaults
Shared‐keyauthenticationisdisabledbydefault.
Mode
Enabled.
Example
Thefollowingcommandenablesshared‐keyauthenticationinserviceprofilesp4:
RBT-8100# set service-profile sp4 shared-key-auth enable
success: change accepted.
Related Commands
• setradio‐profilemodeonpage 11‐63
• showradio‐profileonpage 11‐157
• showservice‐profileonpage 11‐160
Note: Use this command only if advised to do so by Enterasys Networks. This command does not
enable preshared key (PSK) authentication for Wi-Fi Protected Access (WPA). To enable PSK
encryption for WPA, use set service-profile auth-psk on page 11-84.
name Serviceprofilename.
enable Enablesshared‐keyauthentication.
disable Disablesshared‐keyauthentication.