Specifications

11-102 Access Point Commands
set service-profile rsn-ie
EnablestheRobustSecurityNetwork(RSN)InformationElement(IE).
TheRSN IEadvertisestheRSN(sometimescalledWPA2)authenticationmethodsandcipher
suitessupported byradiosintheradioprofilemappedtotheserviceprofile.
Syntax
set service-profile name rsn-ie {enable | disable}
Parameters
Defaults
RSNIEisdisabledbydefault.
Mode
Enabled.
Usage
WhentheRSNIEisenabled,thedefaultauthenticationmethodis802.1X.Thereisnodefault
ciphersuite.Youmustenabletheciphersuitesyouwanttheradiostosupport.
Examples
ThefollowingcommandenablestheRSNIEinserviceprofilesprsn:
RBT-8100# set service-profile sprsn rsn-ie enable
success: change accepted.
Related Commands
• setservice‐profileauth‐dot1xonpage 11‐80
• setservice‐profileauth‐pskonpage 11‐84
• setservice‐profilecipher‐ccmponpage 11‐88
• setservice‐profilecipher‐wep104onpage 11‐90
• setservice‐profilecipher‐wep40onpage 11‐91
• showservice‐profileonpage 11‐160
name Serviceprofilename.
enable Enables
theRSNIE.
disable DisablestheRSNIE.