Specifications

11-100 Access Point Commands
set service-profile psk-phrase
Configuresapassphraseforpresharedkey(PSK)authenticationtouseforauthenticatingWPA
clients,inaserviceprofile.RadiosusethePSKasapairwisemasterkey(PMK)toderiveuniq ue
pairwisesessionkeysforindividualWPAclients.
Syntax
set service-profile name psk-phrase passphrase
Parameters
Defaults
None.
Mode
Enabled.
Usage
MSSconvertsthepassphraseintoa256‐bitbinarynumberforsystemuseandarawhexadecimal
keytostoreintheRoamAboutswitchʹsconfiguration.Neitherthebinarynumbernorthe
passphraseitselfiseverdisplayedintheconfiguration.
TousePSKauthentication,youmustenableitandyoualso
mustenabletheWPA IE.
Example
Thefollowingcommandconfiguresserviceprofilesp3tousepassphrase“1234567890123<>?=+&% 
Thequickbrownfoxjumpsoverthelazysl”:
RBT-8100# set service-profile sp3 psk-phrase "1234567890123<>?=+&% The quick
brown fox jumps over the lazy sl"
success: change accepted.
Related Commands
• clearmac‐userattronpage 8‐12
• setservice‐profileauth‐pskonpage 11‐84
• setservice‐profilepsk‐rawonpage 11‐101
• setservice‐profilewpa‐ieonpage 11 ‐127
• showservice‐profileonpage 11‐160
name Serviceprofilename.
passphrase
An ASCII string from 8 to 63 characters long. The string can contain blanks
if you use quotation marks at the beginning and end of the string
.