Specifications

11-96 Access Point Commands
set service-profile long-retry-count
Changesthelongretrythresholdforaserviceprofile.Thelongretrythresholdspecifiesthe
numberoftimesaradiocansendalongunicastframewithoutreceiv inganacknowledgment.A
longunicastframeisafram ethatisequaltoorlongerthanthefrag‐threshold.
Syntax
set service-profile name long-retry-count threshold
Parameters
Defaults
Thedefaultlongunicastretrythresholdis5attempts.
Mode
Enabled.
Example
Thefollowingcommandchangesthelongretrythresholdforserviceprofilesp1to8:
RBT-8100# set service-profile sp1 long-retry-count 8
success: change accepted.
Related Commands
• setradio‐profilefrag‐thresholdonpage 11‐59
• setservice‐profileshort‐retry‐countonpage 11‐104
• showservice‐profileonpage 11‐160
name Serviceprofilename.
threshold Numberoftimestheradiocansendthesamelongunicastframe.You
canenteravaluefrom1through15.