Specifications

RoamAbout Mobility System Software Command Line Reference 11-95
set service-profile keep-initial-vlan
ConfiguresAPradiosmanaged bytheradioprofiletoleavearoameduserontheVLANassigned
bytheswitchwheretheuserloggedon.Whenthis optionisdisabled,ausersVLAN isreassigned
byeachRoamAboutSwitchtowhichauserroams.
Syntax
set service-profile name keep-initial-vlan {enable | disable}
Parameters
Defaults
Thisoptionisdisabledbydefault.
Mode
Enabled.
Usage
Evenwhenthisoptionisenabled,theRoamAboutSwitchtowhichauserroams(theroamedto
switch)canreassigntheVLANinanyofthefollowingcases:
•AlocationpolicyonthelocalswitchreassignstheVLAN.
•Theuserisconfiguredintheswitch’slocaldatabaseandtheVLANNameattribute
isseton
theuseroronausergrouptheuserisin.
•TheaccessruleontheroamedtoswitchusesRADIUS,andtheVLANNameattributeisset
ontheRADIUSserver.
Example
Thefollowingcommandenablesthekeepinitialvlanoptiononserviceprofilesp3:
RBT-8100# set service-profile sp3 keep-initial-vlan enable
success: change accepted.
Related Commands
showserviceprofileonpage 11160
name Serviceprofilename.
enable EnablesradiostoleavearoameduseronthesameVLANinsteadof
reassigningtheVLAN.
disable Configuresradiostoreassign aroamedusersVLAN.