Specifications

RoamAbout Mobility System Software Command Line Reference 11-93
set service-profile dhcp-restrict
EnablesordisablesDHCPRestrictonaserviceprofile.DHCPRestrictfiltersanewlyassociated
client’straffictoallowDHCPtrafficonly,untiltheclienthasbeenauthenticated andauthorized.
AllothertrafficiscapturedbytheRoamAboutSwitchandisnotforwarded.Aftertheclientis
successfullyauthorized,thetraffic
restrictionisremoved.
Syntax
set service-profile name dhcp-restrict {enable | disable}
Parameters
Defaults
DHCPRestrictisdisabledbydefault.
Mode
Enabled.
Usage
Tofurtherreduce theoverheadofDHCPtraffic,usethesetservice‐profileno‐broadcast
commandtodisableDHCPbroadcasttrafficfromAPradiostoclientsontheserviceprofile’s
SSID.
Example
ThefollowingcommandenablesDHCPRestrictonserviceprofilesp1:
RBT-8100# set service-profile sp1 dhcp-restrict enable
success: change accepted.
Related Commands
• setservice‐profileno‐broadcastonpage 11‐97
• setservice‐profileproxy‐arponpage 11‐99
• showservice‐profileonpage 11‐160
name Serviceprofilename.
enable EnablesDHCPRestrict.
disable DisablesDHCPRestrict.