Specifications

11-90 Access Point Commands
set service-profile cipher-wep104
EnablesdynamicWiredEquivalentPrivacy(WEP)with104‐bitkeys,inaserviceprofile.
Syntax
set service-profile name cipher-wep104 {enable | disable}
Parameters
Defaults
104‐bitWEPencryptionisdisabledbydefault.
Mode
Enabled.
Usage
Touse104‐bitWEPwithWPAclients,youmustalsoenabletheWPAIE.
When104‐bitWEPinWPAisenabledintheserviceprofile,radiosmanagedbyaradioprofilethat
ismappedtotheserviceprofilecanalsosupportnon‐WPAclientsthatusedynamicWEP.
To
supportWPAclientsthatuse40‐bitdynamicWEP,youmustenableWEPwith40‐bitkeys.Use
thesetservice‐profilecipher‐wep40command.
MicrosoftWindowsXPdoes notsupportWEPwithWPA.Toconfigureaserviceprofiletoprovide
dynamicWEPforXPclients,leaveWPAdisabledanduse
thesetservice‐profilewepcommands.
Tosupportnon‐WPAclientsthatusestaticWEP,youmustconfigurestaticWEPkeys.Usetheset
service‐profilewepkey‐indexcommand.
Example
Thefollowingcommandconfiguresserviceprofilesp2touse104‐bitWEPencryption:
RBT-8100# set service-profile sp2 cipher-wep104 enable
success: change accepted.
Related Commands
• setservice‐profilecipher‐ccmponpage 11‐88
• setservice‐profilecipher‐tkiponpage 11‐89
• setservice‐profilecipher‐wep40onpage 11‐91
• setservice‐profilewepkey‐indexonpage 11‐126
• setservice‐profilewpa‐ieonpage 11 ‐127
• showservice‐profileonpage 11‐160
name Serviceprofilename.
enable
Enables104‐bitWEPencryptionforWPAclients.
disable Disables104‐bitWEPencryptionforWPAclients.