Specifications

11-86 Access Point Commands
set service-profile cac-mode
ConfigurestheCallAdmissionControl(CAC)mode.
Usage
set service-profile name cac-mode {none | session}
Parameters
Defaults
ThedefaultCACmodeisnone.
Mode
Enabled.
Example
Thefollowingcommandenablessession‐basedCAConserviceprofilesp1:
RBT-8100# set service-profile sp1 cac-mode session
success: change accepted.
Related Commands
• setservice‐profilecac‐sessiononpage 11‐87
• showservice‐profileonpage 11‐160
name Serviceprofilename.
none CACisnotused.
session CACisbasedonthenumberofactivesessions.