Specifications

RoamAbout Mobility System Software Command Line Reference 11-85
set service-profile beacon
DisablesorreenablesbeaconingoftheSSIDmanagedbytheserviceprofile.
Anaccesspointradiorespondstoan802.11probeanyrequestwithonlythebeaconedSSID(s).For
anonbeaconedSSID,radiosrespondonlytodirected802.11proberequeststhatmatchthe
nonbeaconedSSID’sSSIDstring.
Whenyoudisablebeaconing 
foranSSID,theradiostillsend sbeaconframes,buttheSSIDnamein
theframesisblank.
Syntax
set service-profile name beacon {enable | disable}
Parameters
Defaults
Beaconingisenabledbydefault.
Mode
Enabled.
Example
ThefollowingcommanddisablesbeaconingoftheSSIDmanagedbyserviceprofilesp2:
RBT-8100# set service-profile sp2 beacon disable
success: change accepted.
Related Commands
• setradio‐profilebeacon‐intervalonpage 11‐56
• setservice‐profilessid‐nameonpage 11‐113
• setservice‐profilessid‐typeonpage 11‐114
• showservice‐profileonpage 11‐160
name Serviceprofilename.
enable EnablesbeaconingoftheSSIDmanagedbytheserviceprofile.
disable DisablesbeaconingoftheSSIDmanagedby
theserviceprofile.