Specifications

11-70 Access Point Commands
set radio-profile service-profile
Mapsaserviceprofiletoaradioprofile.Allradiosthatusetheradioprofilealsousetheparameter
settings,includingSSIDandencryptionsettings,intheserviceprofile.
Syntax
set radio-profile name service-profile name
Parameters
Defaults
Aradioprofiledoesnothaveaserviceprofileassociatedwithitbydefault.Inthiscase,theradios
intheradioprofileusethedefaultsettingsforparameterscontrolledbytheserviceprofile.
Table 11‐5liststheparameterscontrolledbyaserviceprofileandtheirdefaultvalues.
radio‐profilename Radio
profilenameofupto16alphanumericcharacters,withnospaces.
service‐profilename Serviceprofilenameofupto16alphanumericcharacters,withnospaces.
Table 11-5 Defaults for Service Profile Parameters
Parameter Default Value
Radio Behavior When Parameter Set To
Default Value
attr No attributes configured Does not assign the SSID’s authorization
attribute values to SSID users, even if
attributes are not otherwise assigned.
auth-dot1x enable When the Wi-Fi Protected Access (WPA)
information element (IE) is enabled, uses
802.1X to authenticate WPA clients.
auth-fallthru none Denies access to users who do not match
an 802.1X or MAC authentication rule for
the SSID requested by the user.
auth-psk disable Does not support using a preshared key
(PSK) to authenticate WPA clients.
beacon enable Sends beacons to advertise the SSID
managed by the service profile.
cac-mode none Does not limit the number of active user
sessions based on Call Admission Control
(CAC).
cac-session 14 If session-based CAC is enabled (cac-
mode is set to session), limits the
number of active user sessions on a radio
to 14.
cipher-ccmp disable Does not use Counter with Cipher Block
Chaining Message Authentication Code
Protocol (CCMP) to encrypt traffic sent to
WPA clients.