Specifications

RoamAbout Mobility System Software Command Line Reference 11-69
set radio-profile rts-threshold
ChangestheRTSthresholdfortheaccesspointradiosinaradioprofile.TheRTSthreshold
specifiesthemaximumlengthaframecanbebeforetheradiousestheRTS/CTSmethodtosend
theframe.TheRTS/CTSmethodclearstheairofothertraffictoavoidcorruptionoftheframedue

toacollisionwithanotherframe.
Syntax
set radio-profile name rts-threshold threshold
Parameters
Defaults
ThedefaultRTSthresholdforanaccesspointradiois2346bytes.
Mode
Enabled.
Usage
Youmustdisableallradiosthatare usingaradioprofilebeforeyoucanchangeparametersinthe
profile.Usethesetradio‐profilemodecommand
.
Example
ThefollowingcommandchangestheRTSthresholdforradioprofilerp1to1500 bytes:
RBT-8100# set radio-profile rp1 rts-threshold 1500
success: change accepted.
Related Commands
• setradio‐profilemodeonpage 11‐63
• showradio‐profileonpage 11‐157
name Radioprofilename.
threshold Maximumframelength,inbytes.Youcanenteravaluefrom256through
3000.