Specifications

11-68 Access Point Commands
set radio-profile rfid-mode
EnablesAPradiosmanagedbyaradioprofiletofunctionaslocationreceiversinanAeroScout
VisibilitySystem.AnAeroScoutVisibilitySystemallowssystemadministratorstotrackmobile
assetsusingRFIDtags.
WhenyouenableRFIDmodeonaradioprofile,radiosinthe profilecanreceiveandprocess
signalstransmitted
byRFIDtagsandrelaythemwithrelatedinformationtotheAeroScout
Engine.IfthefloorplanismodeledinRoamAboutSwitchManager,youalsocanuseRoamAbout
SwitchManagertodisplaythelocationsofassets.
Syntax
set radio-profile name rfid-mode {enable | disable}
Parameters
Defaults
Thedefaultisdisable.
Mode
Enabled.
Example
Thefollowingcommandenablesradiosmanagedbyradioprofilerp1toactasassetlocation
receivers:
RBT-8100# set radio-profile rfid-mode enable
success: change accepted.
Related Commands
• setradio‐profilemodeonpage 11‐63
• showradio‐profileonpage 11‐157
name Radioprofilename.
enable Enablesradiostofunctionasassetlocationreceivers.
disable Disablesradiosfromfunctioningasassetlocationreceivers.