Specifications

11-62 Access Point Commands
set radio-profile max-tx-lifetime
Changesthemaximumtransmitthresholdfortheaccesspointradiosinaradioprofile.The
maximumtransmitthresholdspecifiesthenumberofmillisecondsthataframescheduledtobe
transmittedbya radiocanremaininbuffermemory.
Syntax
set radio-profile name max-tx-lifetime time
Parameters
Defaults
Thedefaultmaximumtransmitthresholdforaccesspointradiosis2000 ms( 2 second s).
Mode
Enabled.
Usage
Youmustdisableallradiosthatare usingaradioprofilebeforeyoucanchangeparametersinthe
profile.Usethesetradio‐profilemodecommand
.
Example
Thefollowingcommandchangesthemaximumtransmitthresholdforradioprofilerp1to
4000 ms:
RBT-8100# set radio-profile rp1 max-tx-lifetime 4000
success: change accepted.
Related Commands
• setradio‐profilemodeonpage 11‐63
• setradio‐profilemax‐rx‐lifetimeonpage 11‐61
• showradio‐profileonpage 11‐157
name Radioprofilename.
time Numberofmilliseconds.Youcanenteravaluefrom500(0.5 second)
through250,000(250 seconds).