Specifications

RoamAbout Mobility System Software Command Line Reference 11-61
set radio-profile max-rx-lifetime
Changesthemaximumreceivethresholdfortheaccesspointradiosinaradioprofile.The
maximumreceivethresholdspecifiesthe numberofmillisecondsthataframereceivedbyaradio
canremaininbuffermemory.
Syntax
set radio-profile name max-rx-lifetime time
Parameters
Defaults
Thedefaultmaximumreceivethresholdforaccesspointradiosis2000 ms(2 seconds).
Mode
Enabled.
Usage
Youmustdisableallradiosthatare usingaradioprofilebeforeyoucanchangeparametersinthe
profile.Usethesetradio‐profilemodecommand
.
Example
Thefollowingcommandchangesthemaximumreceivethresholdforradioprofilerp1to4000 ms:
RBT-8100# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
Related Commands
• setradio‐profilemodeonpage 11‐63
• setradio‐profilemax‐tx‐lifetimeonpage 11‐62
• showradio‐profileonpage 11‐157
name Radioprofilename.
time Numberofmilliseconds.Youcanenteravaluefrom500(0.5 second)
through250,000(250 seconds).