Specifications

RoamAbout Mobility System Software Command Line Reference 11-57
set radio-profile countermeasures
Enablesordisablescountermeasuresontheaccesspointradiosmanagedbyaradioprofile.
Countermeasuresarepacketssentbyaradiotopreventclientsfrombeingabletouserogueaccess
points.
Accesspointradioscanalsoissuecountermeasuresagainstinterferingdevices.Aninterfering
deviceisnotpartoftheEnterasys
networkbutalsoisnotarogue.Noclientconnectedtothe
devicehasbeendetectedcommunicatingwithanynetworkentitylistedintheforwa rding
database(FDD)ofanyRoamAboutswitchintheMobilityDomain.Althoughtheinterfering
deviceisnotconnectedtoyournetwork,thedevicemightbecausing
RFinterferencewithaccess
pointradios.
Syntax
set radio-profile name countermeasures {all | rogue}
Parameters
Defaults
Countermeasuresaredisabledbydefault.
Mode
Enabled.
Examples
Thefollowingcommandenablescountermeasuresinradioprofileradprof3forroguesonly:
RBT-8100# set radio-profile radprof3 countermeasures rogue
success: change accepted.
Thefollowingcommanddisablescountermeasuresinradioprofileradprof3:
RBT-8100# clear radio-profile radprof3 countermeasures
success: change accepted.
Caution: Countermeasures affect wireless service on a radio. When an access point radio is
sending countermeasures, the radio is disabled for use by network traffic, until the radio finishes
sending the countermeasures.
name Radioprofilename.
all Configuresradiostoattackroguesandinterferingdevices.
rogue Configuresradiostoattackroguesonly.