Specifications

RoamAbout Mobility System Software Command Line Reference 11-55
set radio-profile auto-tune power-ramp-interval
Changestheintervalatwhichpowerisincreasedordecreased,in1dBmincrements,onradiosin
aradioprofileuntiltheoptimumpowerlevelcalculatedbyRFAuto‐Tuningisreached.
Syntax
set radio-profile name auto-tune power-ramp-interval seconds
Parameters
Defaults
Thedefaultintervalis60seconds.
Mode
Enabled.
Example
Thefollowingcommandchangesthepowerrampintervalforradiosinradioprofilerp2to120
seconds:
RBT-8100# set radio-profile rp2 auto-tune power-ramp-interval 120
success: change accepted.
Related Commands
• set{ap|dap}radioau to‐tunemax‐poweronpage 11‐33
• setradio‐profileauto‐tunepower‐configonpage 11‐52
• setradio‐profileauto‐tunepower‐intervalonpage 11‐53
• setradio‐profileauto‐tunepower‐lockdownonpage 11‐54
• showradio‐profileonpage 11‐157
name Radioprofile
name.
seconds NumberofsecondsMSSwaitsbeforeincreasingordecreasingradio
powerbyanother1 dBm.Youcanspecifyfrom1to65535.