Specifications

11-54 Access Point Commands
set radio-profile auto-tune power-lockdown
Locksdownthecurrentpowersettingsonallradiosinaradioprofile.Thepowersettingsthatare
ineffectwhenthecommandisenteredarechangedintostaticallyconfiguredpowersettingson
theradios.RFAuto‐Tuningofpoweristhendisabledintheradioprofile.
Syntax
set radio-profile name auto-tune power-lockdown
Parameters
Defaults
Bydefault,whenRFAuto‐Tuningofpowerisenabled,powersettingscontinuetobechanged
dynamicallybasedonnetworkconditions.
Mode
Enabled.
Usage
Tosavethiscommandandthestaticpowe rconfigurationcommandscreatedwhenyouenterthis
command,savetheconfiguration.
Example
Thefollowingcommandlocksdownthepowersettingsforradiosinradioprofilerp2:
RBT-8100# set radio-profile rp2 auto-tune power-lockdown
success: change accepted.
Related Commands
• set{ap|dap}radioau to‐tunemax‐poweronpage 11‐33
• setradio‐profileauto‐tunechannel‐lockdownonpage 11‐50
• setradio‐profileauto‐tunepower‐configonpage 11‐52
• setradio‐profileauto‐tunepower‐intervalonpage 11‐53
• setradio‐profileauto‐tunepower‐ramp‐interval
onpage 11‐55
• showradio‐profileonpage 11‐157
name Radioprofilename.