Specifications

11-50 Access Point Commands
set radio-profile auto-tune channel-lockdown
Locksdownthecurrentchannelsettingsonallradiosinaradioprofile.Thechannelsettingsthat
areineffectwhenthecommandisenteredarechangedintostaticallyconfiguredchannel
assignmentsontheradios.RFAuto‐Tuningofchannelsisthendisabledintheradioprofile.
Syntax
set radio-profile name auto-tune channel-lockdown
Parameters
Defaults
Bydefault,whenRFAuto‐Tuningofchannelsisenabled,channelscontinuetobechanged
dynamicallybasedonnetworkconditions.
Mode
Enabled.
Usage
Tosavethiscommandandthestaticchannelconfigurationcommandscreatedwhenyouenter
thiscommand,savetheconfiguration.
Example
Thefollowingcommandlocksdownthechannelsettingsforradiosinradioprofilerp2:
RBT-8100# set radio-profile rp2 auto-tune channel-lockdown
success: change accepted.
Related Commands
• setradio‐profileauto‐tunechannel‐configonpage 11‐46
• setradio‐profileauto‐tunechannel‐holddownonpage 11‐48
• setradio‐profileauto‐tunechannel‐intervalonpage 11‐49
• setradio‐profileauto‐tunepower‐lockdownonpage 11‐54
• showradio‐profileonpage 11‐157
name Radioprofilename.