Specifications

11-44 Access Point Commands
set {ap | dap} upgrade-firmware
Disablesorreenablesautomaticupgradeofanaccesspoint’sbootfirmware.
Syntax
set {ap port-list | dap {dap-num | auto}} upgrade-firmware {enable | disable}
Parameters
Defaults
Automaticfirmwareupgradesofaccesspointsareenabledbydefault.
Mode
Enabled.
Usage
WhenthefeatureisenabledonaRoamAboutswi tch port,anaccesspointconnectedtothatport
upgradesitsbootfirmwaretothelatestversionstoredontheRoamAboutswitchwhilebooting.
Example
Thefollowingcommanddisablesautomaticfirmwareupgradesontheaccesspointconnectedto
port9:
RBT-8100# set ap 9 upgrade-firmware disable
Related Commands
show{ap|dap}configonpage 11‐128
apport‐list Listofportsconnectedtothe accesspoint(s)onwhichtoallowautomatic
firmwareupgrades.
dapdap‐num NumberofaDistributedaccesspointonwhichtoallowautomatic
firmwareupgrades.
dapauto Configuresfirmwareupgradesfortheaccesspointconfigurationprofile.
(See
setdapautoonpage 11‐13.)
enable Enablesautomaticfirmwa reup grades.
disable Disablesautomaticfirmwareupgrades.