Specifications

RoamAbout Mobility System Software Command Line Reference 11-39
set {ap | dap} radio radio-profile
Assignsaradioprofiletoanaccesspointradioandenablesordisablestheradio.
Syntax
set {ap port-list | dap {dap-num | auto}} radio {1 | 2} radio-
profile name mode {enable | disable}
Parameters
Defaults
None.
Mode
Enabled.
Usage
Whenyoucreateanewprofile,the radioparametersinthe profilearesettotheirfactorydefault
values.
Toenableordisableallradiosthatuseaspecificradioprofile,usesetradio‐profile.
Example
Thefollowingcommandenablesradio1onports5through8assignedtoradioprofilerp1:
RBT-8100# set ap 5-8 radio 1 radio-profile rp1 mode enable
success: change accepted.
Related Commands
• clear{ap|dap}radioonpage 11‐5
• set{ap|dap}radiomodeonpage 11‐38
• setradio‐profilemodeonpage 11‐63
• showradio‐profileonpage 11‐157
apport‐list Listofports. 
dapdap‐num NumberofaDistributedaccesspoint.
dapauto Setstheradioprofilefor
theaccesspointconfigurationprofile.(Seesetdap
autoonpage 11‐13.)
radio1 Radio1oftheaccesspoint.
radio2 Radio2oftheaccesspoint.(Thisoptiondoesnotapplytosingle‐radio
models.)
radio‐profile
name
Radioprofilenameofupto16alphanumericcharacters,withnospaces.
modeenable Enables
radiosonthespecifiedportswiththeparametersettingsinthe
specifiedradioprofile.
modedisable Disablesradiosonthespecifiedports.