Specifications

RoamAbout Mobility System Software Command Line Reference 11-37
Example
Thefollowingcommandincreasestheminimumdatarateonradio1,whichisan802.11b/gradio
ontheaccesspointaccessportonport7,to11Mbps.
RBT-8100# set ap 7 radio 1 min-client-rate 11
success: change accepted.
Related Commands
• setradio‐profileauto‐tunepower‐backoff‐timeronpage 11‐51
• setradio‐profileauto‐tunepower‐configonpage 11‐52
Note: A radio also can increase power, in 1 dBm increments, if more than the allowed percentage of
packets received by the radio from a client are retransmissions. After a radio increases power, all
clients must be at the minimum data rate or higher and the maximum retransmissions must be within
the allowed percentile, before the radio begins reducing power again.