Specifications

RoamAbout Mobility System Software Command Line Reference 11-33
set {ap | dap} radio auto-tune max-power
SetsthemaximumpowerthatRF Auto‐Tuningcansetonaradio.
Syntax
set {ap port-list | dap {dap-num | auto}} radio {1 | 2} auto-tune max-power
power-level
Parameters
Defaults
ThedefaultmaximumpowersettingthatRF Auto‐Tuningcansetonaradioisthehighestsetting
allowedforthecountryofoperationorhighestsettingsupportedonthehardware,whicheveris
lower.
Mode
Enabled.
Example
ThefollowingcommandsetsthemaximumpowerthatRF Auto‐Tuningcansetonradio1onthe
accesspointonport7to12 dBm.
RBT-8100# set ap 7 radio 1 auto-tune max-power 12
success: change accepted.
Related Commands
• setradio‐profileauto‐tunepower‐configonpage 11‐52
• setradio‐profileauto‐tunepower‐intervalonpage 11‐53
apport‐list Listofportsconnectedtotheaccesspointsonwhichtosetthemaximum
power.
dapdap‐num NumberofaDistributedaccesspointonwhichtosetthe
maximumpower.
dapauto Sets themaximumpowerforradiosconfiguredbytheaccesspoint
configurationprofile.(Seesetdapautoonpage 11‐13.)
radio1 Radio1oftheaccesspoint.
radio2 Radio2oftheaccesspoint.(Thisoptiondoesnotapplytosingle‐radio
models.)
power‐level MaximumpowersettingRF Auto
‐Tuningcanassigntotheradio,expressed
asthenumberofdecibelsinrelationto1milliwatt(dBm).Youcanspecifya
valuefrom1uptothemaximumvalueallowedforthecountryof
operation.
Thepower‐levelcanbeavaluefrom1to20.