Specifications

RoamAbout Mobility System Software Command Line Reference 11-31
set {ap | dap} radio antenna-location
Specifiesthelocation(indoorsoroutdoors)ofanexternalantenna.Usethiscommand toensure
thatthepropersetofchannelsisavailableontheradio.Insomecases,thesetofvalidchannelsfor
aradiodiffersdependingonwhethertheantennaislocatedindoorsoroutdoors.
Syntax
set {ap port-list | dap dap-num} antenna-location {indoors | outdoors}
Defaults
Thedefaultantennalocationisindoors.
Mode
Enabled.
Example
Thefollowingcommandsetstheantennalocationforradio1onDistributedAP22tooutdoors:
RBT-8100# set dap 22 radio 1 antenna-location outdoors
success: change accepted.
Related Commands
set{ap|dap}radioantennatypeonpage 11‐32
apport‐list AlistofportsconnectedtotheAPaccesspointtorename.
dapdap‐num ThenumberofaDistributedAPtorename.
indoors Specifiesthattheexternalantennaisinstalled indoors(insidethebuilding).
outdoors Specifiesthattheexternalantennaisinstalled
outdoors.