Specifications

RoamAbout Mobility System Software Command Line Reference 11-29
set {ap | dap} image
LoadsanAirDefenseimageonanAP.
set {ap | dap} location
SpecifieslocationinformationforanAP.
Syntax
set {ap port-list | dap {dap-num} location string
Parameters
Defaults
None.
Mode
Enabled.
Usage
UsethiscommandtospecifyinformationaboutthelocationoftheAP.
Example
ThefollowingcommandspecifiesthelocationofAP7asTheconferenceroom .
RBT-8100# set ap 7 location 'The conference room'
success: change accepted.
Related Commands
• show{ap|dap}configonpage 11‐128
• set{ap|dap}contactonpage 11‐25
apport‐list Listofportsonwhichtospecifylocationinformationfordirectly
connectedAPs.
dapdap‐num NumberofaDistributedAPforwhichtospecifylocationinformation.
locationstring LocationinformationfortheAP.
Ifthelocationinformationincludes
spaces,enclosethe stringinquotes.