Specifications

RoamAbout Mobility System Software Command Line Reference 11-25
set {ap | dap} contact
SpecifiescontactinformationforanAP.
Syntax
set {ap port-list | dap {dap-num} contact string
Parameters
Defaults
None.
Mode
Enabled.
Usage
Usethiscommandtospecifyanindividualordepartmenttocontactforinformationor
maintenanceontheAP.
Example
ThefollowingcommandspecifiesthecontactpersonforAP7asBobtheITguy.
RBT-8100# set ap 7 contact 'Bob the IT guy'
success: change accepted.
Related Commands
show{ap|dap}configonpage 11‐128
set{ap|dap}imageonpage 11‐29
apport‐list Listofportsonwhichtospecifycontactinformationfordirectly
connectedAPs.
dapdap‐num NumberofaDistributedAPforwhichtospecifycontactinformation.
contactstring ContactinformationfortheAP.Ifthe
contactinformationincludes
spaces,enclosethe stringinquotes.