Specifications

RoamAbout Mobility System Software Command Line Reference 11-17
set dap auto radiotype
Setstheradiotypeforsingle‐accesspointradiosthatusetheaccesspointconfigurationprofile.
Syntax
set dap auto [radiotype {11a | 11b| 11g}]
Parameters
Defaults
ThedefaultradiotypeformodelAP3000is802.11g.
Usage
Ifyousettheradiotypeto11aandtheAPconfig urationprofileisusedtoconfigureatwo‐radio
APmodel,radio1isconfiguredasan802.11b/gradioandradio2isconfiguredasthe802.11a
radio.Becausethisisthereverseofthestandardconfiguration(whereradio1is
the802.11aradio
andradio2isthe802.11b/gradio),theradio1settingsconfiguredintheAPconfigurationprofile
areappliedtoradio2.Likewise,theradio2settingsconfiguredintheprofileareappliedtoradio
1.Thisbehaviorensuresthatsettingsforradio1arealwaysapplied
tothe80211aradio,regardless
oftheradionumber.
Example
Thefollowingcommandsetstheradiotypeto802.11b:
RBT-8100# set dap auto radiotype 11b
success: change accepted.
Related Commands
• setdapautoonpage 11‐13
• setdapautomodeonpage 11‐15
• set dap auto persistent on page 11-16
radiotype
11a | 11b | 11g
Radiotype:
• 11a—802.11a
• 11b—802.11b
• 11g—802.11g