Specifications

RoamAbout Mobility System Software Command Line Reference 11-15
set dap auto mode
EnablesaRoamAboutswitch’sprofileforautomaticDistributedaccesspointconfiguration.
Syntax
set dap auto mode {enable | disable}
Parameters
Defaults
Theaccesspointconfigurationprofileisdisabledbydefault.
Mode
Enabled.
Usage
Youmustusethesetdapautocommandtocreatetheprofilebeforeyoucanenableit.
Example
ThefollowingcommandenablestheprofileforautomaticDistributedaccesspointconfiguration:
RBT-8100# set dap auto mode enable
success: change accepted.
Related Commands
• setdapautoonpage 11‐13
• setdapautopersistentonpage 11‐16
• setdapautoradiotypeonpage 11‐17
• set{ap|dap}biasonpage 11‐18
• set{ap|dap}blinkonpage 11‐19
• set{ap|dap}grouponpage 11‐28
• set{ap|dap}radioau to‐
tunemax‐poweronpage 11‐33
• set{ap|dap}radioau to‐tunemax‐retransmissionsonpage 11‐34
• set{ap|dap}radioau to‐tunemin‐client‐rateonpage 11‐36
• set{ap|dap}radiomodeonpage 11‐38
• set{ap|dap}radioradio‐profile onpage 11‐39
• set
{ap|dap}upgrade‐firmwareonpage 11 ‐44
enable Enablestheaccesspointconfiguration profile.
disable Disablestheaccesspointconfigurationprofile.