Specifications

RoamAbout Mobility System Software Command Line Reference 11-7
clear dap boot-configuration
RemovesthestaticIPaddressconfigurationforaDistributedAP.
Syntax
clear dap boot-configuration dap-num
Parameters
Defaults
None.
Mode
Enabled.
Usage
WhenthestaticIPconfigurationisclearedforaDistributedAP,thenexttimetheDistributedAPis
rebooted,itusesthestandardbootprocess.
Example
ThefollowingcommandclearsthestaticIPaddressconfigurationforDistributedAP1.
RBT-8100# clear dap 1 boot-configuration
This will clear specified DAP devices. Would you like to continue? (y/n) [n]y
success: change accepted.
Related Commands
• setdapboot‐iponpage 11‐20
• setdapboot‐switchonpage 11‐22
• setdapboot‐vlanonpage 11‐24
• showdapboot‐configurationonpage 11‐149
dapdap‐num NumberoftheDistributedAPforwhichyouareclearingstaticIP
information.