Specifications

RoamAbout Mobility System Software Command Line Reference 11-5
clear {ap | dap} radio
Disablesanaccesspointradioandresetsittoitsfact ory defaultsettings.
Syntax
clear {ap port-list | dap dap-num} radio {1 | 2 | all}
Parameters
Defaults
TheclearapradiocommandresetstheradiotothedefaultsettingslistedinTable 111andin
Table 114onpage 1163.
Mode
Enabled
apportlist Listofportsconnectedtothe accesspoint(s)onwhichtoresetaradio.
dapdapnum NumberofaDistributedaccesspointonwhichtoresetaradio.
radio1 Radio1oftheaccesspoint.
radio2 Radio2oftheaccesspoint.(Thisoptiondoesnotapplyto
singleradio
models.)
radioall Allradiosontheaccesspoint.
Table 11-1 Radio-Specific Parameters
Parameter Default Value Description
antenna-
location
indoors Location of the radio’s antenna.
This parameter applies only to APs that
support external antennas.
antennatype internal Enterasys external antenna model.
This parameter applies only to AP
models that support external antennas.
auto-tune
max-power
The highest setting allowed for the country
of operation or highest setting supported
on the hardware, whichever is lower.
The maximum percentage of client
retransmissions a radio can experience
before RF Auto-Tuning considers
changing the channel on the radio.
channel 802.11b—6
802.11a—Lowest valid channel number
for the country of operation
Number of the channel in which a radio
transmits and receives traffic
mode disable Operational state of the radio.
radio-profile None. You must add the radios to a radio
profile.
802.11 settings
tx-power Highest setting allowed for the country of
operation or highest setting supported on
the hardware, whichever is lower.
Transmit power of a radio, in decibels
referred to 1 milliwatt (dBm)